How to Charge iTech Fusion Smartwatch? Plug and Play

The iTech Fusion smartwatch is an extraordinary wearable device that is full of features to enrich your daily life. Are you a satisfied owner of an iTech Fusion smartwatch? This iTech Fusion has wonderful features such as fitness tracking, finding your phone, stopwatch, notifications, and more.

This is the main aspect of enjoying your device just charge your smartwatch full and you are ready to move on.

In this article, we will discuss the process of how you can charge your iTech Fusion smartwatch. Also, we will provide some tips that are essential for you as a new user. So, let’s get started and learn how to power up your iTech Fusion smartwatch and get ready for an adventurous journey.

Charge Your iTech Fusion Smartwatch

If you are a proud owner of an iTech Fusion smartwatch the main key aspect of owning the watch is knowing how to charge your device properly. Proper charging means it will not only provide you with the support you need the whole day but also help to maintain the battery life and the overall performance of the device.

We will take you through the steps of charging your iTech Fusion smartwatch with additional tips to expand your battery life.

Charging Accessories You Need:

1. A Clamp Charging Cable
2. A power source, such as a wall adapter, a computer, or a power bank.

Steps to Charge the iTech Fusion Smartwatch:

1. First, locate the charging pin underside of the smartwatch. It is necessary to identify the pin to connect the clamp properly.
2. Plug the charging cable into your power source, e.g. on your computer USB port, or a USB wall charger.
3. Insert your smartwatch into the charging cable clamp. The pins on the charging base must lock safely with the smartwatch, A battery will appear on your smartwatch screen to show you that your smartwatch is charging.
4. Let the iTech Fusion smartwatch proper time to charge fully until the battery reaches 100%. Charging time may vary depending on the battery condition and charging speed. But, iTech Fusion takes about 2 hours (approx.) to charge fully.
5. Unplug the charging cable once it is charged fully. Disconnect the cable to avoid damaging the charging port or the cable itself.

Following these steps, you will able to charge your iTech Fusion Smartwatch safely and effectively. It is necessary to handle the charging cable and the smartwatch with proper care.

Safety Considerations

Smartwatch means you are going to wear it the whole day and night. It is necessary to follow some simple tips as you care for your device. To keep your iTech Fusion smartwatch clean and the skin of the band happy, we suggest following the tips given below:

• Clean the band and your wrist daily. Especially after your intense workouts or sweating.
• Wash the band with cold water or wipe it with a little amount of rubbing alcohol. Do not use detergent, soap water, sanitizer, or household cleaners. These may irritate your skin.
• Wipe it with soft fiber cloths and dry hard before putting it back on your hand.
• Though the iTech Fusion Smartwatch is IP67 rating water resistant, it is not waterproof. That means you should not submerge your watch in deep water than 1 meter for longer than 30 minutes.
• If you have skin or any health issues such as allergies, asthma, or eczema. You may experience skin irritation or redness on your wrist. Remove your device instantly. Contact the dermatologist or an experienced doctor if the symptoms stay longer for 2-3 days.

Tips to Maximize the Battery Life (Bonus Tips)

Smartwatch users have common concerns with the battery life of their smartwatch. It is so annoying that you are thinking about running out of battery power. To get more battery life here are some valuable tips to maximize its lifespan:

• Adjust the Display: The display of the smartwatch consumes a significant amount of battery power. By diminishing the display brightness, you can get a significant battery life.
• Adjust Screen Timeout: By reducing the screen timeout on your smartwatch you can extend the battery life. When you are not using the smartwatch, the display turns off quickly is going to save more battery power.
• Disable Unnecessary Notifications: Notifications are useful, but they also consume battery power. Turn off the notifications of those apps that are not important to you. Turning off the notification will keep your display away from lights on, or vibrating. As a result, your battery life will be prolonged.
• Other tips are as follows:

• Use a Watch Screen with Minimal Animation.
• Limit Background App Refresh.
• Optimize Workout and GPS Usage.
• Keep Bluetooth Connection Range Reasonable.
• Update Firmware Regularly.
• Disable Wi-Fi When not in use.

Following these tips and making small adjustments to your smartwatch settings, you can maximize the battery life of your iTech Fusion smartwatch.

Frequently Asked Questions (FAQs)

Do iTech Fusion Smartwatches Have a Waterproof Option?

The iTech Fusion smartwatches are IP67 water resistant but not IP68 waterproof. That means this smartwatch can withstand splash but you can not swim while wearing it.

Can I Use a Normal Charger for the iTech Fusion Smartwatch?

No. The charger that is used to charge the iTech Fusion is a cable charger with a clamp and it is a unique charger. So, you can not charge it with a usual charger.

Conclusion

Charging your iTech Fusion smartwatch is an easy process that ensures you can enjoy all the features and functions that your smartwatch has to offer. Following the proper charging guidelines above and using the exact accessories, you can extend the battery life of your smartwatch and ensure the best performance of your iTech Fusion smartwatch. Always use the charging cable that comes with the box, we suggest not to use the third-party cable charger. With proper charging habits, your iTech Fusion Smartwatch will provide you the best accompany throughout your day.